Changing Languages; Battery Installation And Information - GeoSafari Jr. Talking Telescope Manual Del Usuario

TRIPOD LEGS INSTALLATION INFORMATION
Insert the legs into the base of the tripod as indicated by the diagram. Once attached,
the legs are not removable.

BATTERY INSTALLATION AND INFORMATION

1. Open the battery compartment door by carefully
loosening the screw with a screwdriver.
2. Install 3 fresh AAA batteries following the illustration
inside the battery compartment.
Note
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline,
standard (carbon zinc), or rechargeable (nickel-
cadmium) batteries.
• Do not recharge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• Only charge rechargeable batteries under adult supervision.
• Only use batteries of the same or equivalent type as recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the toy.
• Do not short-circuit the supply terminals.
3. Close the battery compartment and tighten the screw.
3

CHANGING LANGUAGES

1. Turn on the toy.
2. Open the battery compartment to access the
language button.
3. Press the language button to change languages.
You will hear the name of the selected language
after each button press.
TROUBLESHOOTING YOUR GEOSAFARI JR. TALKING TELESCOPE
Please visit www.educationalinsights.com/talkingtelescope
Some images and audio courtesy of NASA.
Some audio courtesy of http://www.freesfx.co.uk
4