MSR WIND PRO Instrucciones página 7

1. Hold a lighted match over the edge of the burner and open the Flame
Adjuster until gas flow can be heard. See Illustration 7.
2. Turn the Flame Adjuster to desired flame setting.
3. After use, turn the Flame Adjuster OFF. See Illustration 1. Wait for
stove to cool before disassembling.
DISASSEMBLING THE STOVE
1. Make sure the Flame Adjuster is turned OFF and stove has cooled.
Fold the Flame Adjuster.
2. Unscrew the Canister until it releases from the stove Valve Body. Some
gas may escape while unscrewing the canister.
3. Close the Pot Supports by rotating counter clockwise.
The WindPro stove is maintenance free. However, whenever you use the
stove, inspect the Valve Body O-ring and Flat Gasket for damage and
wear. See Illustration 2. If these seals appear damaged or worn, contact
the MSR Product Service Center (800-531-9531) for replacement parts.
OPERATING THE STOVE
(See Illustrations on pages 20-21)
MAINTENANCE
7