Using Your Blender - VOX electronics MS-6010 Manual De Uso

USING YOUR BLENDER

Before the first use, clean the blender according to the section of "quick
cleaning".The time for running unit without load can't exceed 15s.
Important: Blades are very sharp, handle with care. Ensure that the hand-held
blender is unplugged from the power outlet before assembling or removing
attachments.
Operation instruction for blender
Important: Max operation duration per time cannot exceed 1 minute, and the
appliance shall be cooled down to room temperature between two consecutive cycles.
1. To assemble the detachable shaft with the motor unit, turn the shaft anti-
clockwise direction until tightened. To disassemble, just turn in the adverse
direction.
2. Simply plug the hand-held blender to power outlet.
3. Put the food needed to be blended into a cup.
4. Lower the hand-held blender into food. Then press and hold the low speed button
to start operating. At the same time you can select desired speed setting by dialing
the speed control dial, the speed will be increased gradually when you dial the
speed control dial from left to right.
5. You also can start operating by pressing and hold the high speed button, the
appliance will operate at the highest speed all the time. The speed will not be
changed even if you dial the speed control dial.
6. To stop the hand-held blender release the low speed button or high speed button.
Operating instruction for whisk
Important: Max operation duration per time cannot exceed 1 minute, and the
appliance shall be cooled down to room temperature between two consecutive cycles.
1. To assemble the whisk with the motor unit, turn the whisk anti-clockwise direction
until being tightened. To disassemble, just turn in the adverse direction.
2. Simply plug the hand-held blender to power outlet.
3. Put the egg white into the cup, generally, two egg whites are enough.
4. Lower the hand-held blender into the egg white. Then press and hold the low speed
button to start operating. At the same time you can select desired speed setting by
dialing the speed control dial, the speed will be increased gradually when you dial the
speed control dial from left to right.
5. You also can start operating by pressing and hold the high speed button, the
appliance will operate at the highest speed all the time. The speed will not change
even if you dial the speed control dial.
Note: Suggest selecting the high speed button when whisking egg whtie.
6. To stop the hand-held blender by releasing the low speed button or high speed
button of the motor unit.
5