PUREGEAR PureBoom Manual Del Usuario página 3

Getting the Right Fit
You can adjust the PureBoom
Headphones by pulling up or down
on the headband until you find a
comfortable fit on your ears.
Connecting/Bluetooth Pairing
1. Hold down the Multifunction Button
(MFB) for 8-10 seconds until you see
the blue and red LED light flash.
2. Make sure the PureBoom
Headphones are within 2-3 feet/
.6-.9 meters of the device you will
be connecting to.
3. Turn on your device's Bluetooth. Most
devices will automatically detect your
PureBoom Headphones. Locate and
select "PureGear Headphones".
Note: If your device does not automatically detect the
headphones, make sure Bluetooth is turned on, do a
SEARCH for "PureGear Headphones" and then click
Adjustable
connect/pair.
Pairing Troubleshooting
Multi-function
1. When performing the pairing on a Bluetooth device
Button
to detect the headphones, enter 0000 if your
device prompts you for a password during the
LED Light
pairing process.
2. If the pairing is not successful, turn off the headphones
and perform the pairing connection according to the
Bluetooth Pairing steps above.
En