PURE Jongo A2 Serie Manual De Instrucciones página 19

Preparing Jongo to stream audio using Bluetooth
1. Enable the Bluetooth option on your mobile device.
2. On your mobile device, select the option to add a new Bluetooth device. On
some mobile devices you may need to select the search or scan option.
3. Start the pairing process on your mobile device. Do this by selecting Jongo from
the list of available devices that appear on the mobile device's screen. This will
connect automatically once paired.*
You will now be able to stream audio to Jongo from your Bluetooth device.
Note: You will need to disconnect any connected Bluetooth devices from
Jongo to stream from a different Bluetooth device. Bluetooth will automatically
disconnect if you go out of range of Jongo. To manually disconnect you will
usually need to go through your Bluetooth settings on your mobile device.
* Some legacy Bluetooth devices may prompt you to enter a passcode when trying to pair with
Jongo. If this occurs, enter the code 0000.
EN
17