Metra 99-7864 Instrucciones De Instalación página 4

Honda Accord 2003-2007
4. Remove (2) Phillips screws from bottom
of pocket assembly and unsnap and
remove. (Figure D)
5. Remove (2) Phillips screws facing up
under radio/climate control assembly.)
(Figure E)
6. Push and hold the hazard button down.
Carefully insert a flat blade screwdriver
into the slot below the button and push
down to release the center clip.
(Figure F)
7. Unsnap and remove upper panel
(including a/c vents) and remove (3)
Phillips screws behind the panel.
(Figure G)
Tip: You can use a hook tool to grasp
the panel inside of the vent and pull
toward the rear of the vehicle. Be
careful not to scratch the panel.
8. Unclip and remove radio/climate
control assembly.
Continue to kit assembly
(Figure D)
Dash Disassembly 99-7864
(Figure E)
(Figure F)
(Figure G)
4