LaserLiner CombiRangeXtender 30 Manual Del Usuario página 6

2
Use the laser receiver CombiRangeXtender 30 for levelling over longer
distances or when the laser lines are no longer visible. Switch on with
button F; control lamp G will light up.
Set the line laser to hand receiver mode. The laser lines will now pulsate
with high frequency, making the laser lines darker. The laser receiver can
detect these pulsating laser lines up to a maximum distance of 30 m.
Minimum distance from the laser device about 3 m.
Now move the receiver field (B) of the laser receiver through the laser
lines upwards and downwards (horizontal laser line) and/or sideways
(vertical laser line) until the centre LED lights up. Now mark the
horizontal and/or vertical reference dimension.
Minimum distance from the laser device about 3 m. Pay attention that
!
the laser lines are not reflected by reflective surfaces. Such reflections
can lead to false indications.
Slow peeping
(upper LED)
The light intensity of the laser lines is greatest at the centre
!
and diminishes toward the ends. This can reduce the maximum
reception range of the laser receiver.
06 GB
Working with the laser receiver
32 mm
Laser
Continuous tone
(middle LED)
= mark the reference
Rapid peeping
(lower LED)