English; Safety Notes - Berner BACWL 12 V Manual Original

OBJ_BUCH-3354-001.book Page 14 Wednesday, August 30, 2017 10:30 AM

English

Safety Notes

Safety Warnings for Cordless Worklights
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
 Please read and observe all safety warnings and instructions en-
closed with the battery or the power tool with which the battery
was provided.
 Do not work with the cordless worklight in hazardous areas.
 After the automatic shut-off of the cordless worklight, do not con-
tinue to press the On/Off button. The battery could become dam-
aged.
 Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance).
 Do not cover off the lamp head while operating the cordless
worklight. The lamp head heats up during operation and can cause
burns when the heat accumulates.
 Do not use the cordless worklight in road traffic. The cordless
worklight is not approved for illumination in road traffic.
 Before any work on the cordless worklight itself (e.g. assembling,
maintenance, etc.), as well as when transporting and storing, re-
move the battery from the cordless worklight.
 The light source cannot be replaced. If the light source is defec-
tive, the entire cordless worklight has to be replaced.
 Do not allow children to use the cordless worklight. It is intended
for professional use. Children can unintentionally blind themselves
or other persons.
14 | English
1 609 92A 44S • 30.8.17