Aprimatic BASIC WK120 Manual De Instrucciones página 5

3 – AUTOMATIC DOOR STATUS
Upon switch-on, the Selector will display the automatic door status by turning on first the flashing blue LED of the
bidirectional status, then the steady blue LED of the door status.
- Push-button: To change the door status press the central push-button for 2 seconds until the LED starts
flashing; then press the push-button up to the desired status, after 2 seconds the LED will be steady on and the door
will set to the selected status.
If a "lock delay" higher than zero has been programmed and the "lock status" is chosen, the output status LED
(internal radar) will turn on together with the flashing padlock LED; once time runs out the lock status LED will
stay on and the automatic door will lock.
LBT0430 Rev.01
Selettore BASIC WK120
Pag. 5 a 16