Care And Maintenance - ROMPA 16351 Manual De Instrucciones

13. Installation
 Plug the power supply unit into the socket C on the side of the Voice Responsive Dome.
 Only use the power supply provided.
 Connect the Power Supply Unit to the mains electricity supply.
 The unit is activated when a sound (e.g. a voice/clapping) is detected.
 Please note: this product remains illuminated until switched off – it will light up when
switched on and then will go off until a noise activates it again. When there is no noise,
the product will not be activated. Each change in sound produces a different colour.
 Colours follow in sequence. It is not possible to select one single colour.
 The sensitivity can be controlled by adjusting the knob B on the rim of the unit.

14. Care and Maintenance

 Wash the exterior of the Voice Responsive Dome with a slightly soapy cloth.
 Wipe away the excess soap with a damp cloth.
 Never use solvents or liquid detergents on the surface of the dome.
 There is no need to attempt to access the interior of the dome – the light is produced by
LED. It is highly unlikely that these will require any maintenance. Do not remove the
securing pins A.
 Once this product is eventually exhausted, please dispose of it appropriately.