Beper 50.002 Manual De Instrucciones página 10

Ironing system with pressure gauge Use instructions
Do not use the appliance in the presence of explosives, highly flam-
mable substances, gases or open flames.
Do not leave the cord hanging from the edge of the worktop or near
hot surfaces.
Do not leave the appliance exposed to atmospheric agents such as
rain, wind, snow, hail etc. Do not use outdoors.
This appliance must only be used for domestic use for which it was
expressly designed. Any other use is to be considered improper and
therefore dangerous. The manufacturer cannot be responsible for
any damage resulting from improper, erroneous or unreasonable use.
Do not place objects on the appliance due to fire hazard.
Do not insert metal objects into the slots of the appliance.
Do not leave the iron unattended when connected to the net-
work.
Caution! Do not open the tank cap when the appliance is in
pressure!
Warning: this symbol
duct is in operation.
Product description Fig.A
1. Thermostat
2. Steam shot button
3. Continuous steam button
4. Iron switch
5. Retractable power cable
6. Power indicator light
7. Boiler pressure gauge
8. Steam regulation knob
9. Steam ready indicator light
10. Boiler switch
11. Water tank
12. Boiler safety cap
13. Operation light for the iron
14. Button for auto winding of electric cable
Mode use
Attention: iron only on surfaces resistant to heat and on surfaces that allow the passage of steam,
such as ironing boards specific for this type of ironing.
Note: the iron is designed to use tap water, however, if the water is very hard, it is advisable to use a
mixture of distilled water and tap water.
indicates: hot surface when the pro-
10