Product Description And Intended Use; Application Limits - Nice TTN3724HS Instrucciones Y Advertencias Para La Instalación Y El Uso

1

PRODUCT DESCRIPTION AND INTENDED USE

This product is intended to be used to automate swing gates. CAUTION! – Any use other than the intended use, and any use in conditions
other than those described in this manual, is improper and forbidden!
The product is an electromechanical gearmotor, available in two versions: TTN3724HS - TTN3724HSC - TTN3724RHS - TTN6024HS -
TTN6024RHS. It is equipped with a 24V motor and a worm screw reduction unit.
The gearmotor is powered off the external control unit to which it is connected. WARNING! – With the gearmotors mod. TTN6024HS and
TTN3724HS, only the control unit model MC824H can be used!
In case of power outage, the gate can be operated manually by disengaging the gearmotor (for gearmotor models TTN3724RHS and TTN6024RHS
the gate leaf can be moved manually without disengaging the gearmotor).
2

APPLICATION LIMITS

Caution! - The motor must be installed by qualified personnel in compliance with current legislation, standards and regulations, and
the directions provided in this manual.
Before proceeding with the installation:
- Check that the area to which the gearmotor is to be mounted is large enough.
- Check the gate's opening movement and the force exerted by the motor: these depend on the position of the rear bracket.
Model
TTN6024RHS - TTN6024HS
TTN3724RHS - TTN3724HS - TTN3724HSC
- Define the maximum opening angle of the gate leaf and the appropriate motor strength for the relevant system.
Model
TTN6024RHS
TTN6024HS
TTN3724RHS
TTN3724HS
TTN3724HSC
Mod. TTN6024RHS - TTN6024HS
450 450
335 335
225 225
3.7 3.7 4.2 4.2 4.9 4.9
panel lenght (m)
L max (mm)
1710
1370
Angle A (cm)
100° 20
115° 28
110° 18
Mod. TTN3724RHS - TTN3724HS
450 450
335 335
225 225
6 6 0 0
panel lenght (m)
L
L min (mm) Travel (mm)
1030
860
B (cm)
28
28
18
350
270
185
2.7 3.1 3.7 2.7 3.1 3.7
W (mm)
680
105
510
B
A
Mod. TTN3724HSC
0 2.7 3.1 3.7
panel lenght (m)
H (mm)
170
English – 3