Service + Support - sunjoe 24V-DD-CT Manual Del Operador

m
CAUTION!
Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage from various
types of commercial solvents and can be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
Storage
Store your drill/driver in the tool case and out of reach of
children or other untrained persons.
Battery Caution + Disposal
Disposal
Should your appliance need replacement after extended
use, do not dispose of it with the household refuse, but in an
environmentally safe way.
Waste produced by electrical machine items should
not be handled like normal household rubbish. Please
recycle where recycle facilities exist. Check with your
local authority or retailer for recycling advice.
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
m
CAUTION!
Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a fire or explosion.
m
WARNING!
To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead, or completely discharged. When burned, toxic fumes
and materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specific information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert batteries in the correct polarity, as
indicated in the battery compartment or manual, may
shorten the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc), or
Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or
Lithium-Ion) batteries.
6. Do not dispose of batteries in fire. The cell of the battery
may explode.
7. Batteries should be recycled or disposed of as per state
and local guidelines.

Service + Support

• Drill/driver service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
• When servicing a drill/driver, use only identical replacement
parts. Follow instructions in the cleaning and maintenance
section of this manual. Use of unauthorized parts or failure
to follow maintenance instructions may create a risk of
shock or injury.
• If your Sun Joe iON+ 24V-DD-CT cordless drill/driver
®
requires service or maintenance, please call the Snow Joe
+ Sun Joe customer service center at 1-866-SNOWJOE
®
(1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your cordless a drill/driver. Copy these numbers into the
space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
2 4 V - D D - C T
Serial #:
13
®