Conceptronic CIS525U Guía De Instalación Rápida página 9

ENGLISH
Note: When assembling an optical drive (CD-ROM, DVD, HD-DVD, Blu-ray, etc.), you
need to use the 4 assembly screws for optical devices.
You can recognize the assembly screws for optical drives by the picture below.
Fix the optical drive to the CIS525U with 2 screws on each side.
(Screw for Optical Drive)
When assembling a Harddisk, you need to use the 4 assembly screws for Harddisk
drives. You can recognize the assembly screws for Harddisk drives by the picture
above. Fix the Harddisk to the CIS525U with 4 screws on the bottom of the
device. When assembling a Harddisk, you can also swap the front panel for a
closed model. The closed front panel is delivered with the CIS525U.
F. Put the tray back in the housing, replace the back panel and use the 4 back panel
screws to fix the back panel to the tray.
(Screw for Harddisk Drive)
9