Grundig MDI907 Manual De Instrucciones página 12

Use of the unit
Measuring procedure
As a body thermometer
1) Select body mode , the temperature unit will
appear. (Picture at right)
2) Move the probe close to the forehead, make
sure the probe is flat and take measurement with a
distance within 1-5 cm.Press Start/Stop button.
3) The measurement will be finished in 1 seconds,
when it has been completed, you can hear 3 short
beeps, at the same time, the reading will appear on
the display.
Note :
If the reading is <37.5°C(99.5°F) and ≥32°C(89.6°F) the display
•
will show with green backlight.
• If the reading is between value 37.5-38.5°C(99.5-101.3°F),
the display will show together with 1 short beeps, the orange
backlight lasts for alarm.
If the reading is ≥ above value 38.5°C(109.4°F), the display
•
will show together with 3 short beeps, the red backlight lasts
for alarm.
• As the forehead measurement temperature is likely to be
affected by sweat, oil and the surroundings, the reading shall
be taken as a reference only.
• If the probe is placed at an angle close to the forehead
measurement, the reading will be affected by surrounding
temperature.
• Babies' skin reacts very quickly in the ambient temperature.
Therefore, do not take their temperature with the non-contact
thermometer during/after breastfeeding, because the skin
temperature maybe lower than the internal body temperature.
• The thermometer will automatically turn off if left idle for 30
seconds.
12