Bayrol SR15 Manual Del Usuario página 4

WIFI Module SR15
Network
Web portal (www.naturally-salt-poolaccess.com)
Please proceed as follows as soon as the connection to the network is established:

Call up the website: www.naturally-salt-poolaccess.com

Choose the "Registration" option and enter the required data. You will find the node ID in the
Settings -> System Info - > Power module menu.

Once all the settings have been made, you will have extensive remote access to your Salt
Relax PRO. For example, you can choose the performance of the electrolysis setting,
change filter times or switch connected functions using the additional relay.
If you are using the pH and/or Rx option, you will also see the related measured values.
Salt Relax PRO
Setting the network connection when using the
optional WIFI module.
Make these settings once you have installed the WIFI module and
connected it to your Salt Relax PRO.
WIFI
Selecting this option using
WIFI module. The detected WIFI networks are then displayed.
Networks
Select the required network using
confirm using
The keyboard is then displayed and you can enter
the code word for the selected network.
System settings
The configuration settings are entered automatically by the system.
Please consult an IT expert if you are shown an error message.
Status
The status of the WIFI connection is displayed here.
Test connection
The WIFI connection can be tested here.
The WIFI module is connected to the Internet as soon as both LEDs on
the module are lighting.
starts the scan process for the connected
.
EN
/ and