Viesta DH600-XA Manual De Instrucciones página 6

Mounting of the V-FLAP:
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body.
The images only show an example of how to mount the V-flap,the outlet may be various according to
different models and configuration.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
Installation
If you have an outlet to the outside, your cooker hood can be connected as
shown below, by means of an extraction duct (enamel, aluminium, flexible
pipe or not inflammable material with an interior diameter of 150mm).
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood must be placed at a distance of 65~75cm (25.6 - 29.5 inch)
above the cooking plane for best effect.
INSTALLATION (VENT OUTSIDE)
[ EN ● 6 ]
Version: 4.0
KEN002DH 23.02.2021
Pic. 1