Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Remove the battery earth cable. Remove the floor covering and the covering in the left side of the boot.
Remove the spare wheel from the spare wheel box. Remove the covering plate under the shelf. Remove the seat of the back seat. Remove the
threshold frame at the left side of the car. Remove the lower covering of the steering column.
2.
Drill a 13 mm large hole in the back of the boot, at the left half of the spare wheel box.
Carefully remove all metal particles and treat the edges with an anti-corrosion paint.
Put the grommet in the hole.
3.
Route the wiring harness in the boot. Lead the end through the grommet to the socket. (Careful. Hot exhaust!)
Pull the rubber coverplate over the wiring harness. Remove the contactholder from the socket and fit the wires as follows:
Trailer lighting:
Left turn signal
Rearfoglight
Earth
Right turn signal
Right taillight
Brakelights
Left taillight
Fit the socket to the towbar.
4.
5.
Lead the 8-pole connector of the wiring harness with the white and
red/yellow wires together with the relay socket via the left side to the 8-
pole connector under the shelf. Disconnect these connectors and fit the 8-
pole connectors of the wiring harness correspondingly.
6.
Fit the relay socket with the included M5 bolt, nut and ring under the shelf.
Put the included relay in the relay socket.
Lead the end of the wiring harness with the yellow, green, red, brown,
black and white wire through the left side of the vehicle to the fuse box
under the dashboard, and connect these with the included connectors
(see ill.):
Alfa 156 10/1997-09/2003
Wiring harness
Car
Yellow
X
Green
Y
Red
Z
Fit the brown wire to the fuseholder with the brown wire. Fit the black and red wire to the fuseholder with the black wire. Fit the blue connector
with the brown and black wire to the yellow/green wire, which is located directly behind the light switch. Fit the fuses with cover to both fusehol-
ders. Fit the white wire to the bolt of the mounting plate of the fusebox.
7.
Reconnect the battery and check all electric functions, with trailer/caravan connected.
Reinstall disassembled parts.
©ECS1999
FITTING INSTRUCTIONS ELECTRIC WIRINGKIT TOWBAR WITH 12-N SOCKET UP TO
DIN/ISO NORM 1724
Alfa 156 10/1997-
Partno.: ALF-013-Q
Pin No.:
Wire colour:
1 (L)
yellow
2 (54-G)
blue
3 (31)
white 2,5 mm2
4 (R)
green
5 (58-R)
brown
6 (54)
red
7 (58-L)
black
Connector car
A
B
B
ALF-013-Q-E
251099L
Fig.1
C
A
Fig.2
C
Fig.3
R
Alfa 156 09/2003-
Wiring harness
Yellow
Green
Red
STOP
1
6
2
7
3
5
4
C
A
B
A
x
w
Q
Q
Q
Q
Car
Connector car
X
A
Y
B
W
C
B
B
y
z
R
REVISIE 1
Publicidad
