Wunderlich 1250715 Manual De Instrucciones

1. Place the tank bag on your motorcycle's gas tank.
2. Pass the front strap in front of or below the steering head, as applicable to your model. Ensure that wires and cables remain
outside the strap and that they are not pinched by the strap.
3. Connect the strap to the buckle and ensure that the protective pad is placed beneath the buckle to prevent paint damage. It
may be necessary to add one or more holes to the strap to achieve the best fit. Pull the tank bag towards the rear and adjust
the strap as needed for ideal placement.
4. Pass the rear strap beneath the tank and ensure that no cables or wires are pinched by the strap. It may be necessary to add one
or more holes to the strap to achieve the best fit.
5. If your bike has a raised fuel cap, you can cut a corresponding hole in the base plate. To do so, mark the location for the hole and
pull the base plate from the tank bag. Cut the hole with a sharp knife and then heat the cut edges with a lighter to prevent
the woven base from unraveling.
6. When the tank bag is used in its compressed form, engage the fasteners at the front of the map pouch/top flap.