Web Server - BeeWi BBW200 Guía De Utilización

7
will appear in case a new firmware is available. To update the firmware, just press the
"Update peripheral" button in Edition screen, then confirm action and wait for about 3
minutes for the firmware update to be confirmed.
Note local weather report is based on Smartphone location, and temperature unit (°C or
F) can be set in the preferences.
4. GATEWAY MODE
4.1. Introduction
The Smart Temperature & Humidity Sensor can be also controlled remotely via the internet
using a specific internet gateway. In that case, it is necessary to use a different web
application as described in the BeeWi Gateway manual.
4.2. Pairing
In order to register the Smart Temperature & Humidity Sensor as part of the HomeBee
network, it is necessary to pair it securely with the Master Gateway. To do this, follow
these steps:
1) Fit batteries in the Smart Temperature & Humidity Sensor. The sensor will be visible for
pairing during one minute after it has been powered on.
2) Press the Gateway button for 5 seconds until the LED flashes twice per second to initiate
pairing.
3) Once Smart Temperature & Humidity Sensor has been successfully paired with the
Gateway, the new peripheral will show in the web app home screen.

4.3. Web server

Go to the HomeBee portal using a web browser or the web app to access your peripheral.
Using the portal under your own account, it will be possible to access both current
temperature and humidity values as well as history graphs.
5. CAUTION & WARRANTY EXCEPTIONS
5.1. Taking care of your Product
• Use the product indoor only.
• Avoid storage at extreme temperatures, above 45°C (including direct sunlight) or below
-10°C. This can shorten battery life and may affect operation.
• Do not expose the product to rain or moisture.
• When not in use, always store the product in a safe place.
5.2. Damages not covered by standard Warranty
• Damages caused by an improper use of the product such as shocks, drops, exposition
to extreme temperatures, dust, or humidity, or any other cause.
• Damages resulting from any non-respect of manufacturer instructions.
• Cosmetic damages such as scratches, paint, glue or any other alteration made to the
product.
• Damages to the product after a repair or disassembly from non authorized personal.
ENGLISH