Prog; Edit Mode; Set The Midi Transmit Channel - IK Multimedia iRig Keys Pro Manual Del Usuario

English

Prog

8
Sound modules like virtual instrument apps or plug-ins can switch sounds when they receive the Program
Change MIDI message. iRig KEYS PRO sends Program Changes by pressing the PROG up or down buttons.
8
Starting with the currently selected program, iRig KEYS PRO will send the next higher program numbers when
you press PROG UP and lower program numbers when you press PROG DOWN. To set the current program
see the chapter, "EDIT mode".

EDIT mode

iRig KEYS PRO allows you to customize most of its parameters to match any kind of need.
In EDIT mode you can:

• Set the MIDI Transmit Channel.

• Set different touch (velocity) sensitivities.
• Assign a specific MIDI Control Change number to the VOL/DATA knob.
• Send specific MIDI Program Change numbers and set the current program number.
• Send "All Notes Off" MIDI message.
• Transpose the keyboard in semitones.
• Reset a specific SET to factory state.
To enter in EDIT mode, press both OCT buttons .
7
Both OCT buttons will light up to indicate EDIT mode.
You can exit EDIT mode at any time by pressing the C2 key marked "CANCEL/NO".
Please refer to the user manual of the control app for detailed information on this. From the app you'll also be
able to select which MIDI messages the external pedals will send.
Set the MIDI Transmit Channel
MIDI instruments can respond to 16 different MIDI channels. For iRig KEYS PRO to play an instrument, you
need the iRig KEYS PRO MIDI Transmit Channel to match the receiving channel of your instrument.
13