Tabla de contenido
Publicidad
Weight Adjustments
Your monitor should move up and down easily and stay in position.
If the monitor moves down from the desired position, or is hard to lift, you should increase the
counterbalance force. If the monitor moves up from the desired position you should decrease the
counterbalance force.
1
Push the Upper Link (A) down until the Adjustment Screw (B) is visible.
2
Using the 4 mm hex key, turn the Adjustment Screw clockwise (towards + ) to increase force, or counter-clockwise
(towards – ) to decrease force. Turn the Adjustment Screw (B) until the monitor is balanced.
3
Move the monitor around to ensure that the motion is smooth and the arm holds the monitor in place.
NOTE: When installing several of the same monitors, note the position of the needle in the indicator (C) on top of the
arm. Adjust the other arms to match.
CAUTION: Do not over-tighten the Adjustment Screw as it can damage the Arm.
Monitors Should Not Exceed 15.5 lbs (7 Kg)
①
②
C
8
A
B
Publicidad
Tabla de contenido
