DJI Osmo OM Fill Light Phone Clamp Guia Del Usuario página 6

EN
Disclaimer
Congratulations on purchasing your new DJI OSMO
document and all safe and lawful practices provided by DJI OSMO before use. Failure to
read and follow instructions and warnings may result in serious injury to yourself or others,
damage to your DJI OSMO product, or damage to other objects in the vicinity. By using
this product, you hereby signify that you have read this document carefully and that you
understand and agree to abide by all terms and conditions of this document and all relevant
documents of this product. You agree to only use this product for proper purposes. You
agree that you are solely responsible for your own conduct while using this product and for
any consequences thereof. DJI OSMO accepts no liability for damage, injury, or any legal
responsibility incurred directly or indirectly from the use of this product.
OSMO and DJI OM
as "DJI OSMO") and its affiliated companies. Names of products, brands, etc., appearing in
this document are trademarks or registered trademarks of their respective owner companies.
This product and document are copyrighted by DJI OSMO with all rights reserved. No part
of this product or document shall be reproduced in any form without the prior written consent
or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion
of DJI OSMO. This content is subject to change without prior notice. For up-to-date product
information, visit http://www.dji.com and click on the product page for this product.
Warning
1. The DJI OM Fill Light Phone Clamp consists of magnets. Keep it away from magcards,
IC cards, pacemakers, hard disks, RAM chips, and other devices to avoid interference.
2. Make sure to align the marks on the phone clamp and gimbal when attaching. Otherwise,
the phone may fall off.
3. The phone clamp is magnetically attached to the gimbal. DO NOT move the gimbal
too fast or make any sudden movements.
4. The near-field communication and wireless charging functions of the phone may
be affected when the phone clamp is attached. These functions will no longer be
affected once the phone clamp has been removed from the phone.
5. The phone clamp will turn off automatically when the temperature gets too high or low.
6. The color temperature button only works when the fill light is on.
Introduction
Capture the perfect selfie with the DJI OM Fill Light Phone Clamp. The phone clamp boasts
a magnetic design and built-in battery and can be connected to DJI OM 5, DJI OM 4 SE,
and DJI OM 4.
Usage
1. Press the power button to select brightness level (low, medium, high, or off).
2. When the fill light is on, press the color temperature button to select the lighting mode
(cool, warm, or neutral).
3. The phone clamp has a built-in battery. Connect a USB adapter to the USB-C charging
port using a charging cable. The indicator indicates the battery level and charging status.
4
TM are trademarks of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated
product. Carefully read this entire
TM