Singing rock HEX Manual Del Usuario página 6

ZNAČENÍ (obr. 8)
A. Označení výrobce
B. Označení typu
C. Označení normy
D. Obvod hlavy
E. Označení shody
F. Výrobní šarže
Velikost je označena uvnitř přilby písmeny M/L.
ZÁRUKA
SINGING ROCK dává záruku 2 roky na vady materiálu a také na výrobní
vady. Záruka se nevztahuje na vady způsobené běžným opotřebením,
nedbalostí, neodborným zacházením, nesprávným použitím, špatným
skladováním či jiným nakládáním s přilbou v rozporu s tímto návodem.
ENG
INSTRUCTIONS FOR USE
HEX – MOUNTAINEERING HELMET
PART DESCRIPTION (Fig. 1)
A. shell
B. headlamp and ski goggles securing clips and rubber
C. size adjustment knob
D. buckle
E. chin strap
F. removable padding
INSTRUCTIONS FOR USE
This product is category II personal protective equipment (PPE) protecting
the head. It protects the head from hitting obstacles and from being hit
by falling objects. It is designed for sport climbing, mountain climbing,
mountaineering, via ferratas and similar climbing activities. Do not use
it for any other purpose or without reading and understanding these
instructions beforehand. If you have any doubts about its use, please,
contact the manufacturer. The helmet can be used at temperatures
ranging from -20 °C to +30 °C. It must not be used after a heavy impact!
Please, remember that no helmet can protect the user against all dangers!
INSPECTION
Check the condition of the whole helmet before each use! If the helmet's
condition is not satisfactory or if you have any doubts about its perfect
condition, stop using it.
ADJUSTMENT
(fig. 2) Use the knob to loosen the adjustment system before putting the
helmet on and to tighten it properly after putting it on. (fig. 3) Adjust the
slide-through cheek clips symmetrically to put them into a proper position.
(fig. 4) Adjust chin strap length. (fig. 5) Use the helmet only if perfectly
adjusted.
If the helmet cannot be fitted securely to your head, it must not be used.
ACCESSORIES
(fig. 6) Lift the clips carefully and slide the headlamp strap under them.
Secure the strap with the rubber in the back part.
Stickers and writing are admissible if they do not damage the shell
material – paint and ABS.
6