Troubleshooting; Disposal Instructions - Goobay 95173 Instrucciones De Uso

EN User Manual
PIR motion sensor
8

Troubleshooting

Trouble Solution
• Check that all cables are connected properly.
The product does not • Check the operation of the lamp and switch installation is
work. complete the backup again.
• Check the settings.
• Remove obstacles from the detection area.
The sensitivity is not • At temperatures > 40°C, faulty switching may occur.
satisfactory • Ensure the correct mounting height.
• Adjust the light sensitivity (LUX).
The burn time is not
• Set the lighting time (TIME).
satisfactory.
Further questions • Consult your dealer or manufacturer.
9 Maintenance, Care, Storage and Transportation
The product is maintenance-free.
NOTICE! Material damage
• Turn the breaker and disconnect the product from the mains.
• Only use a dry and soft cloth for cleaning.
• Be careful to avoid scratches.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected am-
bience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.
10 Assembly
DANGER! Risk of life by electric shock!
• Do not touch any live parts!
• Turn off devices before working on getting all circuits de-energized!
1. Turn the breaker off and secure it against restarting.
2. Remove the screws in the cover and the strain relief and take it off.
3. Carefully pull the motion detector out of the ceiling. When doing so, pay attention
to the clamping brackets that are under spring tension.
4. Check with a voltage indicating whether the be wired lines are really de-energized.
5. Loosen all cable connections.

11 Disposal Instructions

11.1 Product
According to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. Its components must be recycled or
disposed apart from each other. Otherwise contaminative and hazardous
substances can damage the health and pollute the environment.
As a consumer, you are committed by law to dispose electrical and electronic devices to
the producer, the dealer, or public collecting points at the end of the devices lifetime for
free. Particulars are regulated in national right. The symbol on the product, in the user
manual, or at the packaging alludes to these terms. With this kind of waste separation,
application, and waste disposal of used devices you achieve an important share to
environmental protection.
WEEE Nr.: 82898622
11.2 Packaging
Packaging can be disposed of free of charge at the suitable collection points – pa-
per belongs in paper bins, plastics belong in yellow sacks and glass belongs in
used glass bins.
DE4535302615620
12 EU Declaration of conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH
ensures, that the product is conformed to the basic European standards and
directives.
13 Symbols used
For indoor use only
Recycling
Alternating current
REV-2021-07-30
V2.0 ir
Subject to change without notice.
IEC 60417- 5957
ISO 7001 - PI PF
066
IEC 60417- 5032
- 4 -
by Wentronic GmbH | Pillmanstraße 12
38112 Braunschweig | Germany
95173
Goobay®