SOUNDMASTER NR50 Manual Del Usuario página 19

Radio data system (RDS)
This is the features to display the information which released from the radio broadcast and will
showed on LCD display step by step as below by pressing the Info button continuously:
Radio text program type

Digital audio broadcasting (DAB) radio
1. Set the unit to "DAB" mode by Function button.
2. Press the "Scan" button once; unit will start to full scan from range 11b-12d one time within
around 2 second. Then press Tune up/down button to select your desired DAB channel.
3. Press the Info button continuously to check the below info released by DAB.
Group name

scrolling text
4. Turn the Volume knob to the desired volume level.
Preset stations
You can store up to total of 40 radio stations in the memory (20 FM/20 DAB).
1. Set to FM/DAB mode
2. Turn to the desired radio station by "manual" or "auto" tuning method.
3. Press and hold the Mem/Clock-Adjust button for about four seconds to enable memory state,
the preset station will flash on LCD display.
4. Press the Skip up
5. Press Mem/Clock-Adjust button to confirm the preset memory.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Press the Mem/Clock-Adjust button once to enable recall state
2. Press Skip up
3. Press Memory/Clock-Adjust button to confirm the recall memory station.
 The unit needs about 3 seconds to store the station. This state would resume to normal tuner
mode automatically.
 You can overwrite a current station by re-storing a new frequency at this place.
FM-Stereo reception
 The FM stereo LED indicator lights up when a station with sufficient transmitter power is
found.
 To check if stereo signal is being received, press Info button repeatedly until reaching the
mono/stereo section. The display will show "Mono" or "Auto (Stereo)" to show which
signal is now receiving
Hints for best reception:
The receiver work with a DAB/FM antenna, made sure the antenna had plugged into the
antenna socket and totally unraveled for the best reception.
signal strength

frequency transfer rate

/down button to select the desired station memory for storage.
/down button to select the desired memory station.
date/time frequency
 
signal strength
 
4
NR50 / English Instruction Manual
mono/stereo

date/time program type
 