Operating; Hints For Use; Cleaning; Technical Features - Girmi TS36 Manual De Uso

OPERATING THE UNIT
This unit helps you to make different types of crepes and pancakes in a simple and fast way.
- Remove any packing material and any stickers attached to the product.
- Clean the cooking plate (1) with a soft, slightly damp sponge and dry with a napkin.
- Choose a suitable place to use the equipment, leaving sufficient space around the product to
prevent heat damage the walls or other nearby objects.
- Connect the electric plug to a suitable power outlet.
- Put the crepe maker over the base (4), linking the connector (6)
- Switch on the appliance by pressing the power button (2): the function indicator will light
and the plate will begin to heat up.
- After 4 minutes, the plate is ready for cooking.
CAUTION: After use, turn off the appliance by pressing the power switch (2) and
wait for the plate (1) to completely cool before storing the unit.

HINTS FOR USE

- Mix the flour and the egg, add water slowly, beat the mixture with a whisk, making sure that
the consistency of the batter is creamy.
- Pour the mixture into the bowl (5), connect the unit and pre-heat for about 3 minutes.
- Turn the pancake maker and dip the plate in the bowl with the mixture, wait a few seconds
for the batter to stick to the plate (1).
- Extract the crepe maker from the container and link it to the connector (6) on the base (4).
Wait about 20 seconds and when the color of the mixture changes, the pancake is ready.
- Turn the unit on a dish to arrange the crêpe, drop it if necessary using a wooden spoon.
Garnish as desired.
Note: cooking time may differ according to the ingredients.
RECIPE
Egg crêpes
Ingredients: 250g of flour, 3 eggs, ½ Lt of milk, 1/4 teaspoon of salt, 60g of sugar, 40g of melted
butter. Place the ingredients in a container and mix for 30 seconds; place the batter at the center
of the container and continue to stir the mixture for about 30-60 seconds until it becomes smooth.

CLEANING

Unplug the unit from the electrical outlet and let the appliance cool down completely
before starting cleaning operations.
Do not immerse the unit in water or leave it under the jet of tap water. In any case, prevent water
or other liquids to flow on the surface. Do not use abrasive or metal sponges for cleaning. Clean
the cooking plate (1) and body by using a slightly damp sponge and dry them thoroughly. To
clean the bowl, use dishwashing detergents.

TECHNICAL FEATURES


Power supply: AC 230V, 50Hz

Power: 800W

Plate diameter: 20cm
8