Rollei 9s Plus Guia Del Usuario página 9

Settings
In the System Setting mode you can
enter the settings for the system
and choose different parameters
for the camera.
Parameters for the camera in video mode:
• Video resolution: Here you can set the resolution of your recordings.
• Video Quality: You can set the video quality between low, medium and high.
• Voice Record: When it is on, sound is recorded, when it is off, recordings are without sound.
• EV: You can set the exposure compensation between -2.0 (image becomes darker) and +2.0 (image becomes
brighter).
• Image Stabilization: With Image Stabilization turned on, the video will be smoother.
• Loop Record: Here you can take shots of the duration of the interval again and again and save them indivi-
dually.
• Timelapse Interval: You can set different intervals to determine the speed of the time lapse video.
• Timelapse Duration: You can determine the duration of your time-lapse recording here.
• Slow Motion Movie: You can turn this on or off. If this function is switched on, the playback of your recor-
ding depends on the resolution frame rate. The higher this is (up to max. 240 fps), the slower you can play
back the video.
• Fast Motion Movie: This function describes the FastMotion function, which gives you a 2 to 15 times played
back recording.
• Wind Noise Reduction: This function improves your sound recording in the video and suppresses ambient
noise.
• Auto Low Light: In low light conditions, this function is useful for brightening your image.
• Metering: Here you can set the image area on which the camera focuses, e.g. in the center (Center), at
different points (Multi) or at one point (Spot).
• Date Stamp: Here you can give your images a date stamp or a date & time stamp.
9