Joyello JL-972 Manual De Instrucciones página 7

COMPONENTS FROM
THE PRODUCT BASE
A - Light
B - Float
C - Mist maker
D - Air outlet
INSTRUCTIONS FOR USE
- First place product on flat surface.
- Remove the tank from base, turn it over and unscrew the tank cap (see figure) and then fill the tank with water. Fill product with
clean water, at a temperature which does not exceed 40°C.
Close the valve cap and place the tank back on its base, taking care during this procedure. Always check that the water tank and
pipes are dry and clean.
Unscrew the tank cap Fill the tank with water
7