RMD0865Manual SE2.qxp 11/28/07 8:48 AM Page 3 Exploded Drawing for Assembly Parts List A. Tub (1) B. Lock Assembly (1) C. Rear Struts (2) D. Rear Frame (1) E. Rear Axle Assembly (1) F. Front Frame (1) G. Front Struts (2) H.
RMD0865Manual SE2.qxp 11/28/07 8:48 AM Page 5 Important Safety Instructions 1. READ ALL INSTRUCTIONS BEFORE USE. If you do not understand these instructions, need clarification or further explanation, please call our toll free answer line for assistance at 1-800-867-6763. 2. Do not load the cart with more than 1,200 lb (544 kg). Do not use the dumping feature of the cart with a load of more than 500 lb (226 kg).
Página 4
RMD0865Manual SE2.qxp 11/28/07 8:48 AM Page 7 Step 3 Slide rear struts onto the ends of the rear axle assembly. M8x20 truss head bolt Step 4 Attach the rear axle assembly and rear struts to the rear frame and tub using M8x30 truss head bolts (5), M8x20 truss head bolt (1), M8 flat washers (6), and M8 lock nuts (6).
Página 5
RMD0865Manual SE2.qxp 11/28/07 8:48 AM Page 9 Step 6 Attach the lock assembly to the tub using M8x20 truss head bolts (3), M8 flat washers (3) and M8 lock nuts (3). Step 7 Attach the wheels by first placing the wheel spacers (4) onto each axle, then placing the wheels onto each axle and finally placing the M12 flat washers (4)
Página 6
RMD0865Manual SE2.qxp 11/28/07 8:48 AM Page 11 Using the Dumping Feature To operate the dumping feature, pull the dumping release handle outward to release the plastic bed from the locking mechanism. Lift up the release handle to rotate cart upward into the dumping position. Returning the Plastic Bed to the Lowered Position...