EXALTA EL-550 Manual De Instrucciones página 13

USEFUL ADVICE FOR HAIR REMOVAL TREATMENTS
Remove hair after carefully washing and drying the area in question.
Wait until the wax is fluid so it spreads easier.
Take a small amount wax from the jar using a spatula and spread it evenly
on the area to be treated, in the direction of the hair growth.
Before the wax becomes hard, apply hair removal strip on the area to be
treated. Make sure it perfectly adheres to the freshly applied wax.
Wait until the wax hardens, then firmly rip the strip away, against the
direction of hair growth. Continue using the same procedure.
Important! Hot wax hair removal should not be performed on extremely
delicate parts of the body like the face, bikini area and armpits. It should
also be avoided in the case of fragile capillaries and veins, and high
sensitivity to heat.
Attention! Once melted, the wax reaches a very high temperature. Make
sure the wax has reached a temperature which does not cause bursts
before applying it to the skin.
ATTENTION!
The wax heater EXALTA duecento50 has been specifically designed to
heat hair removal wax cans or to be used with the basket container
for hot wax supplied; the company will not be held responsible under
any circumstances for an improper use for the appliance or any use
other than the intended purpose.
CLEANING ANDMAINTENANCE
Make sure that the appliance is disconnected before carrying out any
cleaning operation. Use appropriate products able to eliminate residual
wax which has settled in the wax warmer.
TECHNICAL SPECIFICATIONS
Professional wax warmer with temperature setting for wax cans
Suitable for 400ml cans
Knob for setting the wax temperature
Provided with bucket for hot wax or wax in pieces
Power Supply: 220-240V ~50Hz
Power: 100W
Operation use conditions: Room temperature: from 10°C to 40°C.
Relative humidity: from 30% to 75% without condensation. Pressure:
from 700 – 1060 hPa.
13