Allmatic MICRO CAP SENS Manual De Instrucciones página 11

6. Transmitter's learning
6.1 Learning with the learning button of the control unit
Press the learning key
1
Press a key of the transmitter's
2
channel to memorize
Release the key of the transmitter
3
The learning has had a successful ending.
4
The control unit is ready to regularly work.
Transmitter's
reset
SERIES CLARUS (the right
and left keys are not present
in CLARUS I)
6.2 Learning with memorized transmitter
Transmit the menu voice "M" of a
memorized
transmitter or press and release the
1
hidden key of a B.RO transmitter. This
operation is equivalent to press the
learning key of the control unit.
Press a key of the transmitter's channel to
memorize.
2
Release the transmitter's key
3
The learning has had a successful end.
4
The control unit is ready to regularly work.
(*) For the menu functions of the series CLARUS radio transmitter, make reference to the provided
instructions.
Warning: do not utilize this procedure in presence of more control units. The opening of
the memory will occur in all the control units where the channel is memorized. So, it is
advisable to disconnect the control units which are not interested on the learning of this
new transmitter.
6-1622111 rev.1
Hidden
key
channel of a CLARUS (*)
18/09/2012
ITA
SERIES B.RO
ENG FRA ESP DEU
The control unit emits three beep.
The control unit emits a long beep.
The control unit emits four beep.
Hidden
key
SERIES UP – DOWN
The control unit emits three beep.
The control unit emits a long beep.
The control unit emits four beep.
POR
3/8