Lanaform Foot Tapping Manual De Instrucciones página 24

INSTRUCTIONS FOR USE
Attention: Use of this massaging unit may interfere with television reception
1) Place the Foot Tapping on a stable surface and insert the plug into the electric outlet. Be sure that the Mode-On/Off
switch functions correctly.
2) In a sitting position, place the tapping cushions over the tense or tired region, such as the sole of the foot or the calves.
Concentrate on the soles of the feet to relieve muscle tension.
3) Press the Mode-On/Off switch. The Indicator Light will light up automatically. The timer is activated as soon as the
power is switched on, and the massaging motion shuts off automatically after 15 minutes of usage.
4) When you press the Mode-On/Off button, the modes selected successively are: Power Off — Automatic Mode
— Manual Mode — Power Off.
Automatic Mode: Modifies rhythm, tapping strength, and tapping speed automatically. Manual adjustments cannot be
made to the tapping strength and speed.
Manual Mode: Tapping strength and speed can be chosen by the user.
5) When selecting Manual Mode by pressing the Mode-On/Off switch, the Tapping Speed and Tapping Strength switches
GE
will blink. Press the Tapping Strength and Tapping Speed buttons to adjust the strength and speed of the tapping
according to your preference. To adjust the strength of tapping: pressing on the Tapping Strength button switches the
indicator between High and Low. To adjust the speed of tapping: pressing on the Tapping Speed button switches the
indicator between settings: High — Normal — Slow.
Attention:
• Do not block the tapping mechanism by pressing too hard on the cushion while massaging.
• Do not use the cushion for longer than 15 minutes, the maximum period of usage. If you wish to continue massaging,
please allow 30 minutes between each session.
• Repeated and extended usage or too great a pressure on the tapping cushion could cause the internal temperature of
the unit to rise and trigger the safety mechanism, stopping its motion. If this occurs, unplug the unit from the electric
outlet and wait one hour before reusing the unit. If the unit remains plugged in, the tapping will restart immediately,
posing possible danger.
6) The timer is activated when the power is turned on, and suspends the motion after a period of 15 minutes. If you stop
the unit during a session, press the Mode-On/Off button and turn off the Mode indicator light. If you press the Mode-
On/Off button, the unit will switch between modes: Off— Automatic Mode —Manual Mode — Off
7) Unplug the power cord from the outlet after each use
MAINTENANCE AND STORAGE
Cleaning:
• Unplug the power cord from the outlet before handling. Not doing so could lead to electric shock or damage to the unit.
• Do not rinse the unit with water. The unit contains electric components and this could cause an accident or damage the
unit.
Outside Casing of the Unit
• To clean the outside casing of the unit, dampen a soft cloth with a mild detergent diluted with water, wring it out, and
wipe the outside of the unit.
• Do not use solvents such as paint thinner, benzene, or spray cleaning agents.
• Use cotton balls to remove dust on the surface of the cushion.
Storage:
Keep the device in its box in a dry and cool safe place and out of the reach of children. To avoid breakage, do NOT wrap
24