Lanaform Full Tech Filter Manual De Instrucciones página 8

HOW TO REPLACE THE FILTER
EN
• Lie the unit on its side so you can see the filter cartridge at the bottom of the appliance. Hold the grip on the filter
cartridge and press in the direction of the arrow to release the hooks that hold the cartridge in the unit. Remove the
cartridge, holding it by this grip.
A- Downward arrow
• One by one, gently straighten the fasteners along the filter cartridge and remove the washable pre-filter from the case.
Do the same for the activated carbon HEPA filter and the layer of the Nano cold catalyst filter.
C- Fastener
1. Washable pre-filter
2. Activated carbon layer
3. HEPA Filter
4. Nano cold catalyst layer
5. Non-woven mesh
6. Filter cartridge case
• Remove the plastic cover from the new filter. One by one, gently straighten the fasteners along the cartridge case and
insert the filter in the cartridge case, loosening the fasteners until the filter is fully inserted in the cartridge. Secure
the filter with the fasteners. When the filter is in place, write the date on the side of the box to remind you when you
replaced it.
• Align the arrows on the side of the filter and the case.
• Replace the cartridge containing the new filter by gently pushing it into the bottom of the appliance until you hear it
click into place. When you hear this click, it means that you have finished changing the filter.
8
B- Filter cartridge
A
C
B
1
2
3
4
5
6