First Steps - VITLAB genius2 Instrucciones De Manejo

5. First Steps

5.1 Is everything in the package?
Confirm that your package includes:
Bottle-top dispenser VITLAB
valve, telescoping filling tube, recirculation tube (genius
certificate and this operating manual
Nominal volume, ml
1, 2, 5, 10
25, 50, 100
5.2 Assembly
Warning!
Wear protective clothing, eye protection and gloves! Follow all
safety instructions and observe limitations of use and operating
limitations (page 30-32).
1. Mounting the filling tube/ recirculation tube
Adjust the length of the telescoping filling tube to the bottle height
and attach it. Center and attach the filling tube carefully to avoid
damaging the nozzle. If a discharge tube with a recirculation valve is
used (genius ), the optional recirculation tube must also be installed.
2
Insert it with the opening pointing outward (Fig. 1).
2. Mounting the instrument on a bottle and alignment
Screw the instrument (GL 45 threads) onto the reagent bottle, and
then align the discharge tube with the bottle label. This is done by
rotating the valve block with the discharge tube (Fig. 2).
To avoid tipping over, use a bottle stand for small bottles.
34
simplex with discharge tube or genius
® 2
Adapters for bottle thread,
PP
GL 25, GL 28/S 28, GL 32, GL 38, S 40
GL 32, GL 38, S 40
with discharge tube with recirculation
2
), mounting tool, bottle adapters, a performance
2
1
2
Filling tube
Length, mm
125-240
170-330