Casanoov TOUCH Manual Del Usuario página 5

[Tapez ici]
2. How to change installer's pin code（4 digits）
For security reasons, you can change the installer's pin code to be one of your own, so no one else but you
can only change and program the keypad in the future.
To change new installer's pin code as follow:
a. Enter programming => one long beep follow to confirm
b. Press ( 69 ) + ( # ) for changing the new installer's code => one short beep follow to confirm
c. Key in new 4 digits installer's pin code and end up with (#) key => one long beep and one short beep
follow to confirm.
d. Keypad exits programming mode
How to Program each channel's pin code（4 digits）
3.
Keypad has 2 channels, each channel can control different receiver independently
You can choose and program each channel to a different pin code as follow:
a. Enter programming => one long beep follow to confirm.
b. Key in 2 digits channels' number you would like to program（01 for 1
end up with（#）key =>the times of beep to indicate user which channel is programming now.
c. (1 beep for 1 channel; 2 beeps for 2
st
d. Key in the new 4 digits pin code you choose for this channel, end up with (#) key. => one long beep and
one short beep follow to confirm.
e. Keypad exits programming mode.
Example for programming 1
➔ Entering programming: 0+0+0+0+* => one long beep follow to confirm
➔ Choose the channels' number: 0+1+# => one short beep follow to confirm
➔ Key in new pin code: 2+0+2+0+# => one long beep and one short beep follow to confirm.
Note!
（1） 1 channel can be programmed with 8 groups of pin code，2
st
groups of pin code.
（2） If the pin code you programming now is already existed, the red LED indicator would flash 5 times
and then exit programming mode.
（3） After entering pin code programming, if the pin code is full programmed，the red LED indicator
would flash 5 times to indicate you that now the pin code is full programmed, if user still key in the new pin
code now within 6s, the previous programmed pin code will be deleted, this new pin code will be 1
code of this channel.
Factory default pin code for 1
Factory default pin code for 2
channel)
nd
channel's pin code to be 2020
st
channel: 1111
st
channel: 2222
nd
channel; 02 for 2
st nd
channel can be programmed with 3
nd
EN
channel）,
pin
st
4