Uline H-5486 Guia De Inicio Rapido página 2

NOTE: Do not fully tighten bolts until cart is fully
assembled.
1. Screw casters into frames. (See Figure 1)
NOTE: Casters with brakes are recommended
on front side of cart, but can be attached
according to preference.
Figure 1
Front
2. Attach bottom shelf to frames using 4 medium bolts.
(See Figure 2)
Figure 2
Alignment
of threaded
inserts may
require a
screwdriver.
PAGE 2 OF 6
Back
Front
ASSEMBLY
3. Adjust frame to desired height. Fasten in place using
four short bolts and four wing nuts. (See Figure 3)
4. Attach frame support to frames using four short bolts.
(See Figure 3)
Figure 3
Back
Frame
5. Attach the small middle shelf to the front and the
large top shelf to the back of the frames using eight
long bolts. (See Figure 4)
Figure 4
Back
6. Fully tighten all bolts with Allen wrench.
1-800-295-5510
uline.com
Frame
Support
Front
0521 IH-5486