Smanos KP-20 Manual Del Usuario página 5

EN
Disarm
Rotate the Keypad Ring to the left, and then enter the Keypad
password (if you have not changed the default password, Press the
left top key 6 times). The indicators will turn to Green.
Installation
Place the Keypad near the
entrance of your home that is
convenient for you to control the
system on your way out/in.
Rotate the Keypad to Arm
the system for checking the
connection with the Hub.
Important: Make sure the UP mark on the Back Cover is pointing up
before mounting on a flat surface.
Once level, you can install the Sensor by using either the double-
sided tape or the screws with mollys included in the package
Notice: Removing the Back Cover off of this Keypad will result in
an alarm; you can disarm the alarm and continue the installation.
Specifications
Model: KP-20
Power: 3V CR123A li-Mn battery x 2 pcs
Frequency: EAN 8718868403957 868MHz
UPC 859756005209 915MHz
Wireless range: ≤ 80 m (in open area)
Operating conditions:
0-50°C/32° - 122°F, humidity < 90% RH (non-condensing)
Dimensions (L x W x H): 80 x 80 x 35.5mm/3.15" x 3.15" x 1.34"
EN