Using The Scent Creator; Preparing The Appliance; Pairing Your Smartphone - The Alchemist Atelier Scent Creator Guia Del Usuario

USING THE SCENT CREATOR

Preparing the Appliance

To begin using the Scent Creator make sure you have scent cartridges, empty
formula bottles and a door cover.
1. Open the door by pushing on both sides of the
bottom half of the door. It will click open, then you
can pull the drawer out all the way.
2. If this is your first use, remove any protective pack-
aging. Remove the cardboard protective cover
from the door and attach your new cover. Magnets
will hold it in place.
3. Insert scent cartridges into empty slots in the
basket. When inserting a cartridge into the basket
make sure it goes in all the way.
4. Push the drawer in and close the door by pushing on both sides of the bottom
half until it clicks shut.
5. Connect the supplied power cord to the socket located at the rear.
6. Plug the power cord into the mains.
7. Turn on the power switch located at the rear. If this is your first use the status
lights will blink indicating that a Bluetooth connection is needed.

Pairing your Smartphone

You will only need to do this once. Your devices will remember the pairing after-
wards.
8