Technical Data; Impact Driver Safety Warnings - Milwaukee HEAVY DUTY M18 ONEFHIWF1D Manual Del Usuario

TECHNICAL DATA

CORDLESS IMPACT SCREWDRIVER
Production code.................................................................................
No-load speed .............................................................
Impact range ...............................................................
Torque .........................................................................
No-load speed .............................................................
Impact range ...............................................................
Torque .........................................................................
No-load speed .............................................................
Impact range ...............................................................
Torque .........................................................................
No-load speed .............................................................
Impact range ...............................................................
Torque .........................................................................
Torque max ........................................................................................
Max. diameter bolt / nut .....................................................................
Battery voltage...................................................................................
Weight according EPTA-Procedure 01/2014 (12 Ah) ........................
Frequency band(s) of Bluetooth ........................................................
Radio-frequency power .....................................................................
Bluetooth version ...............................................................................
Recommended ambient operating temperature ................................
Recommended battery Type .............................................................
Recommended charger Type ............................................................
Noise/vibration information
Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) ..................................
Sound power level (Uncertainty K=3dB(A)) .......................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 62841.
Vibration emission value a
h
Impact tightening of fasteners of the maximum capacity of the tool .
Uncertainty K= ................................................................................
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

IMPACT DRIVER SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a „live" wire may make
exposed metal parts of the power tool „live" and could give the
operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing loss.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy
non-slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
18 ENGLISH
470 343 - M18ONEFHIWF1D, M18 ONEFHIWF1DS.indd 18 470 343 - M18ONEFHIWF1D, M18 ONEFHIWF1DS.indd 18
M18ONEFHIWF1D M18 ONEFHIWF1DS
....4771 34 01... ................... 4771 25 01
...000001-999999 ..000001-999999
......... 0-600 min -1 ...................0-600 min
......... 0-750 min ...................0-750 min
-1
...........1180 Nm ...................... 1180 Nm
......... 0-700 min -1 ...................0-700 min
......... 0-930 min ...................0-930 min
-1
.......... 1254 Nm ...................... 1254 Nm
......... 0-900 min -1 ...................0-900 min
....... 0-1200 min .................0-1200 min
-1
.......... 1966 Nm ...................... 1966 Nm
....... 0-1200 min -1 .................0-1200 min
....... 0-1440 min .................0-1440 min
-1
.......... 2576 Nm ...................... 2576 Nm
...........2711 Nm ...................... 2711 Nm
.........1-1/2" ...........................1-1/2"
.............. 18 V ............................. 18 V
........... 12,1 kg ......................... 11,1 kg
. 2402-2480 MHz ...........2402-2480 MHz
............. 1,8 dBm ....................... 1,8 dBm
.... 4.0 BT signal mode .... 4.0 BT signal mode
.................................-18 .... +50 °C
...............................M18B ....M18HB
.........M12-18C, M12-18AC, M12-18FC, M1418C6
....... 101,29 dB (A) .............. 102,07 dB (A)
........112,29 dB (A) .............. 113,07 dB (A)
......... 31,71 m/s 2 .................... 24,24 m/s
............. 1,5 m/s ........................ 1,5 m/s
2
Do not machine any materials that present a danger to health (e.g.
asbestos).
Switch the device off immediately if the insertion tool stalls! Do not
switch the device on again while the insertion tool is stalled, as
doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
The possible causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING! Danger of burns
• when changing tools
• when setting the device down
Chips and splinters must not be removed while the machine is
running.
When working in walls ceiling, or fl oor, take care to avoid electric
cables and gas or waterpipes.
-1
-1
-1
-1
-1
-1
-1
-1
2
2
07.07.2020 09:40:58 07.07.2020 09:40:58