Section 4 − Specifications; Duty Cycle - WeldCraft WP-17-12-R Manual Del Operador

2-1. Specifications
Ampere Rating
150 Amps W/Argon Gas @ 60% Duty Cycle DCEN; 125 Amps W/Argon Gas @ 60% Duty Cycle ACHF
Cooling Method
Tungsten Size
Cable Options
12-1/2 ft (3.8 m) or 25 ft (7.6 m) One-Piece High−Flex
12-1/2 ft (3.8 m) or 25 ft (7.6 m) One-Piece Mono−Flex,
Or 12-1/2 ft (3.8 m) Or 25 ft (7.6 m) Two-Piece High−Flex
Dimensions
Length: 7 in. (178 mm); Handle Diameter: 7/8 in. (22 mm);
Weight: 6.1 oz (173 g)

2-2. Duty Cycle

0
Definition
10
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
Minutes
NOTICE − EXCEEDING RATED AMPERAGE can damage torch and void warranty.
•
SECTION 2 − SPECIFICATIONS
WP-17
.020 Thru 1/8 in. (0.5 Thru 3.2 mm)
Do not exceed rated amperage (see Section 2-1)
Model
WP-17V (With Gas Valve)
Air
12-1/2 ft (3.8 m) Or 25 ft (7.6 m) One-Piece High−Flex, Or
12-1/2 ft (3.8 m) Or 25 ft (7.6 m) One-Piece Mono−Flex, Or
12-1/2 ft (3.8 m) Or 25 ft (7.6 m) Two-Piece High−Flex
Length: 7 in. (178 mm); Handle Diameter: 7/8 in. (22 mm);
Weight: 6.8 oz (193 g)
60% Duty Cycle AT 150 Amperes DCEN Using Argon Gas
60% Duty Cycle At 125 Amperes ACHF Using Argon Gas
60%dutycycle
6 Minutes Welding 4 Minutes Resting
sb1.5* 8/93
OM-225 427 Page 3