Publicidad
Idiomas disponibles
Idiomas disponibles
CLIPLIFT™ is a lifting system designed exclusively to simplify the cleaning and maintenance
of tractor mowers with a maximum weight of 300 kg - 660 Ibs.
Any use of CLIPLIFT™ for purposes other than those described in this user manual will
be entirely the user's responsibility and the distributor will not accept liability under any
CLIPLIFT™ may be used after each mowing to clean very quickly the housings of tractor
mowers in order to avoid rapid rusting due to the acid in the crushed grass.
NEVER WORK DIRECTLY UNDERNEATH A TRACTOR MOWER
CLIPLIFT
BeFore use:
• The manoeuvre can be done by a single user.
• Ensure you secure the area by keeping children and animals at a safe distance.
• Always lift CLIPLIFT™ on a stable, plane and horizontal surface.
• Place the CLIPLIFT™ on the side opposite the air filter on your tractor mower.
seT-uP
• Switch off the ignition in order to shut down the engine of your tractor mower completely and remove
the key.
• Remove the grass box from your tractor mower.
• Position the CLIPLIFT™ behind the rear wheels of the tractor mower.
• Move the tractor mower into the lifting cradle (10) by hand.
• Put the tractor mower parking brake on.
• The front wheels should be pointing towards the inside (hydraulic jack side) (1).
TILTIng:
• Press the pedal (2 and 3) on the hydraulic jack pump (1).
• Move the mechanism with your foot some 10 to 15 times in order to tilt the tractor mower to mid-
height.
• Place the safety strap (14) around the rear wheel and the lifting cradle (10).
• Repeat the lifting operation until the safety device activates (5).
• Place the safety support (11) between the lifting cradle (10) and the base frame (9).
• Carry out any cleaning and maintenance tasks.
CLIPLIFT - User Manual and Spare Parts Catalogue
circumstances.
IMPORTANT
Serial n°
A
10
0
0
- 2 -
0
0
0
0
0
T
Publicidad
