Phottix Aion Manual De Instrucciones página 4

The Phottix Aion Wireless Timer and Shutter release
will work as a wired or wireless timer and remote
shutter release system.
Tip: Turn off all devices – cameras, and Phottix
Aion Timers or Receivers - when connecting and
disconnecting devices.
Inserting batteries in Timer and Receiver
1. Press the battery cover in while pushing it
away from the timer or Receiver. The battery
cover will slide open.
2. Remove the battery cover.
3. Insert AAA batteries.
4. Replace the battery cover and push back into
the locked position.
Turning timer and Receiver on/off
1. To turn on the Phottix Aion Timer and
Receiver unit – press the Power Button.
2. To turn off the Phottix Aion Timer and
Receiver unit – press the Power Button.
3. The Timer will beep and images will appear
on the LCD screen when the unit powers on.
2
4. The Receiver's LED will flash green then
red when the unit powers on. The LED will
continue to flash green when the unit is on.
Turning the sound on/off
1. By default sounds on the timer unit are on.
You will hear audible beeps from the Phottix
Aion when it is first powered on, when
starting and stopping programs or when a
photo is taken.
2. When the sound function is enabled a
musical symbol is visible on the LCD.
3. To disable sound press and hold the Sound
/ Mode Button until the sound symbol
disappears.
Using the Backlight
1. Use the Backlight to illuminate the LCD
screen.
2. Press and release the Backlight / Lock Button.
The backlight will illuminate the LCD for
approximately 10 seconds before turning off
automatically.