Adjusting Stitch Length; Adjusting Overedge Cutting Width - Strima TEXI JOYLOCK 2/4 Manual De Instrucciones

ADJUSTING STITCH LENGTH

Turn the stitch length dial until the
required length is indicated.
The higher the number, the longer
the stitch. This dial can adjust the stitch
length from 1 to 5 mm.

ADJUSTING OVEREDGE CUTTING WIDTH

Overedge cutting width can be adjusted from 4 to 7 mm by simply turning
overedge cutting width dial according to the kind of fabric.
It is set at standard width of 6 mm when delivered from the factory.
Turn it towards "5" if fabric edge curls while sewing.( Fig.1)
Turn it toward "7" if loops hang off the edge. (Fig.2)
Texi Joylock 2-4 instrukcja 2017.indd 75 Texi Joylock 2-4 instrukcja 2017.indd 75
Left needle thread loose
and visible on
under side of fabric.
Increase left needle thread
tension and/or
decrease either or both
looper threads.
Right needle thread loose
and visible on
under side of fabric.
Increase right needle thread
Texi Joylock 2/4
tension.
EN
75
18.09.2020 11:48 18.09.2020 11:48