OPERATION ______________________________
Charging
If run with the installed rechargeable nickel metal
hydride batteries, use the charging station with the
mains adapter as a charger.
1
R emove the accessory used.
2
I nsert
the
appliance
ing station
so that it precisely fits.
G
– The charging contacts of the appliance and
the charging station touch each other.
Plug the mains adapter into the wall socket.
– When the appliance is charging, the charge
indicator LED
lights up red.
D
– When the appliance is fully charged, the
charging LED
lights up blue.
D
Note
Fully charge the batteries before using for the first
7
time or if the batteries have not been used for a long
time (8-10 hours).
Charge the appliance at room temperature. Lower
7
or higher temperatures have a negative effect on the
life of the batteries.
The ambient temperature should be between 5˚C
7
and 40˚C.
When fully charged, the appliance works for around
7
20 minutes. It is not advisable to charge the batteries
after every use, especially if you do not use the
appliance for the full 20 minutes. Only charge the
batteries when they are completely discharged.
This increases their life. Do not charge it every day.
Disconnect the power supply unit from the socket.
in
the
charg-
Switching on and off
1 Remove the appliance from the charging station
.
G
2 Switch on the appliance by pushing the on/off
button
.
E
3 Switch off the appliance by pushing the on/off
button
.
E
4
I nsert the appliance in the charging station.
ENGLISH
17