EVOLUTION OF AIR CONTROL
Quick reference guide
FOR YOUR SAFETY
The quick reference guide is not a substitute for the operating instructions.
It is important to read and follow the detailed operating instructions before using the tire
inflator. In particular, the included safety instructions and details on operation must be read
and followed.
It is imperative to read, understand and apply the information in the operating instructions
to ensure proper and safe operation of the device.
Intended use
The tire inflator is a measurement device and is
solely intended to check tire pressure and fill or
vent tires with condensate-free compressed air or
nitrogen.
The device may only be operated with
a compressed air supply system rated
for max. 16 bar operating pressure and
fitted with a safety valve.
Improper use
Avoid misuse of the device:
as a compressed air pistol,
in areas exposed to explosion hazards.
Hazard areas
Areas on and around the device are associated
with increased risk to your safety and/or the safety
of other persons.
Follow the operating instructions.
Never point the device at yourself,
other people or animals.
Instruct unauthorised persons about
the hazard areas.
4
Components
1
Quick coupler (G3/8 thread)
2
Pressure gauge
3
Fastening screw (G1/4 thread)
4
Compressed air hose
5
Valve adaptor
6
Suspension eye
7
Operating lever
Installation
1. Inspect the device for damage sustained
during transport.
2. Release any residual pressure from the supply line.
3. Connect the compressor supply hose (nominal
diameter 6 mm) to the quick coupler.
4. Apply air pressure or nitrogen supply.