Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-7879
Honda CR-Z 2011-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted and textured to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) ISO Brackets • C) Pocket • D) (7) #8 x 3/8" Phillips truss head screws
• E) (2) #6 x 3/8" Phillips pan head screws • F) (4) White plastic clips • G) (1) Metal clip
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729 - Honda harness 2008-up
Antenna Adapter: • 40-HD11 - Honda antenna adapter 2009-up
TOOLS REQUIRED
• Panel removal tool (ATHKNGL) • Phillips screwdriver
METRA. The World's best kits.
APPLICATIONS
99-7879
C
D
E
™
1-800-221-0932
F
G
metraonline.com
Table of Contents
Dash Disassembly
– Honda CR-Z 2011-up ........................................... 2
Kit Preparation ....................................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7879
Resumen de contenidos para Metra 99-7879
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7879 APPLICATIONS Table of Contents Honda CR-Z 2011-up 99-7879 Dash Disassembly – Honda CR-Z 2011-up ........... 2 Kit Preparation ............2 Kit Assembly KIT FEATURES – ISO DIN radio provision with pocket ...... 3 • ISO DIN radio provision with pocket •...
-
Página 2: Kit Preparation
99-7879 re-using the factory hardware. 4. Remove (2) Phillips screws holding the passenger airbag light from the factory panel and install into the 99-7879 using the supplied #6 screws. Note: (Figure A) is on next page Continued to kit assembly (Figure B) -
Página 3: Iso Din Radio Provision With Pocket
Kit Assembly 99-7879 Kit preparation ISO DIN radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends Red factory clip Hazard switch using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. - Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7879 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
-
Página 5: Componentes Del Kit
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7879 APLICACIONES Indice Honda CR-Z 2011 y mas 99-7879 Desmontaje del tablero – Honda CR-Z 2011 y mas ........2 Preparación del kit ..........2 Ensamble del kit CARACTERÍSTICAS DEL KIT – Provisión de radio DIN ISO con bolsillo ....3 •... -
Página 6: Honda Cr-Z 2011 Y Mas
Desmontaje del tablero 99-7879 Honda CR-Z 2011 y mas Preparación del kit 1. Desenganche y quite la tapa del panel del tablero más bajo que está 1. Quite el gancho de arriba del arriba del bolsillo y quite el tornillo centro del radio de fábrica e... -
Página 7: Provisión De Radio Din Iso Con Bolsillo
Preparación del kit Provisión de radio DIN ISO con bolsillo 1. Ubique el arnés del cableado de fábrica Interruptor de las luces en el tablero. Metra recomienda usar el Gancho rojo de fábrica intermitentes adaptador de acoplamiento adecuado de Metra o AXXESS. Vuelva a conectar el terminal negativo de la batería y... - Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7879 EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...