Setting The Time/Date; Setting The Fan - Honeywell VisionPRO Serie Guia Del Usuario

Setting the time/date

1 Touch the current time. The screen
displays Select Option.
2 Touch Time or Date, then touch Select.
3 Touch or
s t
date is displayed.
4 Touch Done to save or
changes.
5 Touch Home to redisplay the Home
screen.
NOTE: The date is not shown on the
home screen; however, it should be set
to allow the thermostat to adjust time
automatically for daylight saving time
and for other features such as vacation
hold.

Setting the fan

FAN
1 Touch to display fan settings.
2 Touch On, Auto, Circ, or Follow Schedule.
3 Touch Done to save and exit.
On: Fan is always on.
Auto: Fan runs only when the heating
or cooling system is on.
Circ: Fan runs randomly about 35%
of the time (residential use only).
Follow Schedule: Fan controlled by
program (see pages
until the proper time/
Cancel to ignore
– ).
4 6
Select Option
Please Set Time
On
NOTE:
In commercial
use, touch Auto or On to
temporarily override the
programmed fan schedule.
3
MCR34092
Time Date
MCR34155
6 :30 PM
MCR34094
MCR34096
Auto Circ
MCR34097
69-2761EFS—09