3.
Screw (2-4) posts into the pilot holes in the
right edge of the left Boundary Screen.
4.
Move the left screen up and over and down
against the right screen to engage the posts in the
clips and secure the two (2) panels together.
TIP: Unscrew the posts one (1) turn if they are
difficult to engage with the clips.
NOTE: Use the rubber mallet to help with alignment.
5.
Attach one (1) L Bracket to both screens
using ten (10) #10-12 x 5/8" wood screws.
6.
Attach one (1) FrameOne Leg Bracket
to the right and left screen using three (3)
#10-12 x 5/8" wood screws.
NOTE: Do not tighten down Leg Bracket
completely. This Leg Bracket is temporarily
attached for locating pilot holes.
7.
Create two (2) or more wood spacers
½" thick.
5
6
MODEEZ
3
SCREW
4
½"
7
Page 9 of 63
76550 Rev B