Safety Instructions; Correct Use; Hazard Warning Symbols; Warranty And Liability - DENTAURUM 090-606-00 Manual De Instrucciones

EN
2

Safety instructions

Caution Read through the instructions for installing and operating the unit carefully before
switching it on.

2.1 Correct use

The table with water circulation unit enables the high frequency casting machine megapuls compact to be
operated without connecting it directly to the water supply. It also serves as a support table for the casting
machine, positioning it at an optimum working height.
The unit is intended solely for use with the high frequency casting machine megapuls compact in a dental
laboratory. The unit should only be used for the purpose for which it is intended. Dentaurum GmbH & Co. KG, is not
liable for damages resulting from any other use of the machine. Approved use also includes adhering to the
instructions for use as well as servicing and carrying out maintenance work at regular intervals.
When a Dentaurum product is finally no longer in use the disposal regulations of that particular country apply.
Dentaurum or the dental trade is available to answer questions regarding the correct disposal of any specific
product.

2.2 Hazard warning symbols

In the instructions for use, the following warning symbols were used:
Warning Suggests possible danger to life or health of persons.
Ignoring this warning may result in serious harm to health or even fatal injury.
Caution Suggests a possibly dangerous situation.
Ignoring this warning may result in slight personal injury or damage to equipment .
i
Note General information regarding the machine.

2.3 Warranty and liability

Our general terms for sale and delivery apply. Warranty and liability to persons or machinery is not applicable when
attributable to one or more of the following points:
• incorrect operation, use, assembly and maintenance of the machine
• misuse of the machine
• operation of the machine despite defect safety fixtures or incorrectly fitted or faulty safety and protective
precautionary measures
• failure to follow the advice in the instructions for use regarding transport, storage, assembly, operation and
maintenance of the machine
• failure to monitor working parts
• personally conducted alterations to the build of the machine
• unauthorized repairs

2.4 Owner responsibility

The owner may only permit those persons to use the machine who
• have been trained to use the machine and are familiar with the safety precautions
• have read and understood the safety advice and instructions for use
• have been instructed in the relevant accident prevention precautions
12